In last week’s article, we discussed the benefits and drawbacks of split testing and the advantages of using AI-powered workflow optimization to achieve higher conversion. And to make it relevant I included an example email course, to show you how you can increase the open rate of your emails in drip campaigns. This article continues with one more use case where you can take a look at how to increase the click rates of your onboarding emails with machine learning. So let’s move along the buyer journey from the consideration to the decision stage.
Table of Contents
- What’s User Onboarding?
- Why do you need it?
- Onboarding Email Examples
- Split testing vs. AI-powered workflow optimization
- Wrapping it up
What’s User Onboarding?
Like in the case of the email course the purpose of an onboarding email sequence is education. But in this example, it’s more of a “software-based” education. So the function of user onboarding is to make it easier for people to get started with your product.
By the end of the onboarding, they should be able to achieve their desired outcome.
Why do you need it?
Your onboarding will have a big effect on your customer acquisition. If you screw this up you will lose lots of valuable customers.
Although I said it’s more of a “software-based education”, it’s not just a technical onboarding. It’s not just about you showing your prospects the product. It’s more than that! You have to provide value to them as fast as you can!
First of all, you should ask yourself: how can I give my leads “initial success”? Not from your point of view, but from the prospects’.
So the purpose of onboarding is to make them reach their initial success, which means you won because the next logical step will be paying for your service!
Tips for Successful Onboarding Emails
Let’s take a look at some tips you should follow to have a successful user onboarding process. You can even look at these tips as a checklist. As you build your onboarding you need to take all of these into consideration, so just tick the points you completed.
- Send the first email immediately
Approximately 75% of users expect a welcome email after signing up? In addition, 90% of users go cold after 1 hour.
- Provide clear instructions
Help your new trial user to understand the next logical step in order to reach his “success milestone” and see the benefits he or she can gain.
- Send behavior-based emails
This is a great way to help the users who are stuck somewhere in your software. However, you have to use events that will trigger your emails according to your users’ actions.
- Add value with your emails and be benefit focused
According to newbreedmarketing, the content you provide will have a big effect on user activation.
- Extend the trial period for engaged users
This is a nice gesture that helps you convert the more engaged trial users. But don’t offer too many days!
- Take advantage of lead scoring
Lead scoring for user actions in your trial will help you identify who should be converted before the trial ends. You can segment your users according to their level of engagement and then send different offers to them.
- Ask questions
To increase free trial conversion rates you need to understand the reason why users are leaving your product. This is why utilizing exit interviews with users who are not active can be extremely useful.
Types of Onboarding Emails
According to Lincoln Murphy, the king of user onboarding, there are 5 types of email you can send to your trial users:
- Tutorial: specific educational emails that focus only on your product.
- Educational: these focus on the benefits of your product and how the users can take advantage of them.
- Aspirational: case studies, example use cases of your product.
- Transactional: reports, status updates, invoices.
- Personal: sent from an employee of your company, usually with a goal of one-to-one, interactive communication.
A successful user onboarding email sequence should contain a combination of these types of emails.
Now let’s have a look at a couple of onboarding emails and how AI-powered optimization can help you convert more trial users.
Onboarding Email Examples
In this example, there are 3 emails each with an A and a B variation.
These are the most important onboarding emails in my opinion: the welcome email, a sales email midway through the trial, and another sales email at the end of the trial. The goal is to increase the overall click-through rate of these emails.
The first is a welcome email that a prospect receives after registering for the trial variation of our service.
A variation B variation
This is a short, two sentence transactional email. It’s sent right after the prospect signs up, and it’s gibberish free. Just a little gratitude and an offer for a free consultation.
This is a longer transactional email, and it has the same basic elements as the A version. In addition, there’s some social proof (2nd sentence), and an offer (3rd sentence) to reach out to us via email or in-app message. This offer is crucial because it is sort of a call for engagement. It shows that you care about your customers, and if you can provide solutions to their problem they are more likely to stick with you. Another additional feature of this email is the P.S., which provides more valuable educational content for the prospect, and that is just great during onboarding!
As I previously mentioned it’s extremely important to send out the first email immediately because the users will expect it. And because of its importance, you need to nail this one.
This is the message that will set the tone for your future communication with the user.
Both of the examples could work because variation A is a straightforward, no bs email so the recipient might read it. Variation B however, can establish trust in the service and gives more value.
The second one is sent out when a user has 6 days left of the trial.
A variation B variation
This one is a short email with a discount offer. If this email pops up in the inbox of an engaged trial user the offer should motivate the prospect to pay for the service much sooner. Voilá, conversion achieved!
This version lacks the offer presented in variation A, but it is benefit-focused. So the less-engaged users can learn what advantages the software provide. However, even the more engaged users might not be aware of these advantages, and for them, this can be enough to make a purchase.
When the user receives this email he or she has been using our software for 8 days. So depending on the depth of use, they are more or less familiar with the product and hopefully figured out if this is the right one for them or not.
The third is sent out when the user reached the end of the trial period.
A variation B variation
Once again this is a short email notifying the user that the trial is over. It reminds the prospect of the benefit and points to the payment page. If the user is satisfied, this email can be enough to result in a conversion.
This is a longer version of the previous email but in a personal tone. It shows compassion and highlights the main benefits of the product in a more detail. The other difference is that the text doesn’t point directly to the CTA as in variation A. It’s more of a subtle approach, but still, it feels like a click is the next logical step after reading the last sentence.
So we looked at the example emails, now let’s see how to select the better-performing ones with traditional split testing and AI-powered workflow optimization.
Split testing vs. AI-powered workflow optimization
As we discussed in the previous article split testing automated emails manually is too technical and nearly impossible. So if you decide to do it brace yourself!
The main problem with split testing emails in a drip campaign is that the exploration and exploitation parts are two distinct stages, which in this case will result in a very long test. Because to have significant results you have to wait a lot until enough prospects receive the emails. And the length of the exploration period will result in the use of outdated information in the exploitation stage.
So if you want to test the emails in the example with manual split testing you should start out by setting up sending weights for each email like this: 50% for variation A, 50% for variation B.
After the significance level is sufficient for each email, you should adjust the sending weights accordingly.
You have to select a winner that received a higher click rate and continue by sending out that version out to everyone from now on. Not to mention you already lost people who received the low performing versions until you decide the winner variation.
It might not seem too long or hard, but if you try it out you might hit some speedbumps. In addition, because of the nature of split testing even if your results are significant there’s a chance that the results are accidental which means sending out emails that perform worse.
But there’s a way to avoid all of these struggles: testing with a multi-armed bandit and machine learning algorithm that optimizes your whole workflow for you.
With AI-powered workflow optimization, all you have to do is set up the email variations and let the machine learning algorithm do its job. It is determining which email variation chain results in higher click-through (and consequently high conversion) rate.
The algorithm starts out just like you would do it manually: 50% sending weight for variation A, and variation B for each email, but then the magic happens:
As your prospects are flowing through your drip campaign it is continuously learning and fine-tuning simultaneously the sending weights based on the click rates.
As a result, it will send out more and more of the better performing emails, and less of the poorly performing ones. This cycle goes on and on, so the algorithm makes sure to always send the best possible email sequence based on the goals you’ve set up.
Wrapping it up
Whether you’re just starting to develop your user onboarding, or you think you need to improve the process you should start by testing out variations of the most crucial emails in your workflow: testing is a tool that will help you have more engaged users. Higher engagement drives more sales, so it is an opportunity you should never miss!
Next week we’ll publish the upcoming article, that explains how to build a loyal customer base and increase upsells by using and optimizing lifecycle emails.
If you have any question feel free to share it in the comments, and if you want to give AI-powered optimization a shot it’s now in public beta!
[trx_line style=”solid” color=”#dd9933″]
Take your user onboarding to the next level. Get started now!
[trx_line style=”solid” color=”#dd9933″]